Slider tensile strength test
The Body to Puller Strength is measured by this test. The complete slider is mounted on a special jig and load is applied to the Puller while keeping the Body fixed at 90 degrees. The resistance of the slider is measured till failure and is recorded in Kgf.
Tensile Tester velocity used in the above tests varies between 100~300 mm / min and the standard Clamp width used is 25mm.
Tensile Tester velocity used in the above tests varies between 100~300 mm / min and the standard Clamp width used is 25mm.
http://www.malabrigoyarn.com
ReplyDeleteThank you very much for your sharing, I like it very much. i'm very happly to get the infirmation. It is also very necessary to test textiles. A very reliable textile testing equipment company: QINSUN. You can go to know: https://www.qinsun-lab.com
ReplyDelete